Working Mode
If you are heading for a working area which lies outside the Bluetooth signal range,
you may activate scanner’s store mode, following steps described below. Under this
mode, all scanned data will be stored directly into the buffer memory of the device.
Furthermore, data entries will be permanently saved in the buffer memory prior to
the manual upload into the working station, so that you may upload them when you
are near your working device.
$LAN#UK
UK keyboard
$LAN#HU
Hungary keyboard
$LAN#TK
Turkey Q keyboard
$LAN#TF
Turkey F keyboard
*Normal Mode Store Mode
To Next Page
Loading...
