Netum NT-1203 - Scanner receiver setting

20 pages

To Next Page

To Previous Page

For Example

Custom @ as prefix

Step 1: scan “custom prefix”

Custom Prefix

Step 2: To set these values, scan a four-digit number (i.e. four bar codes) that corresponds to ASCII values. See

Numeric Bar Codes in appendix 1. Scan 1043(@) one by one.

Step 4: Set Data Transmission Format

Custom Suffix

Step 1: scan “custom suffix”

Scan Suffix 1

Step 2 and Step 3 same procedures like custom prefix

Step 4: Set Data Transmission Format

Other manuals for Netum NT-1203