8
Press HOME TEAM FOULS
to enter the home Team Fouls ADD mode.
The control might prompt
[__H.FOULS _____2+__]
. In this example the current Home Team
Fouls is 2 and the “+” indicates that the control is ready to add to the current total. Enter a single digit
number or press NO or YES or another function key to abort and leave the home fouls unchanged.
NOTE: You cannot subtract, but you can use the SET key first, then directly enter the correct total (up to
19).
GUEST TEAM FOULS
works the same way.
Press NEXT POSS.
to see the current status.
The control will show
[_______N.POSS_______]
if neither team has been awarded a next
possession status yet. Press the
NEXT POSS. Key again to indicate
[__H___N.POSS_______]
and again to indicate
[_______N.POSS___G__]
.
NOTE: The first time the key is pressed, the current setting will be recalled to the display. Press any other
key to exit without changing the setting. To change the setting, first press the key to recall the current
setting to the display then toggle the setting with each additional key press. To clear both settings, press
SET, then NEXT POSS.
Press BONUS
to see the current status.
The control will show
[_______BONUS_______]
neither team is in bonus. Press the
BONUS
Key again to indicate
[__H____BONUS_______]
and again to indicate
[_______BONUS____G__]
and again
[__H____BONUS____G__]
then
[_______BONUS_______]
NOTE: The first time the key is pressed, the current setting will be recalled to the display. Press any other
key to exit without changing the setting. To change the setting, first press the key to recall the current
setting to the display then toggle the setting with each additional press of the
BONUS
key.
DOUBLE BONUS
Press SET, then BONUS
to see the Double Bonus status.
DOUBLE BONUS works the same as the BONUS.
Note: MPC-6 controls revision R3.5 or later and MPCW-6 controls revision R3.5 or later are programmed
to automatically set the BONUS and DOUBLE BONUS indicators. It is based on the number of team fouls
entered. When a team’s 7
th
foul is entered on the control, the opponent’s BONUS indicator illuminates.
Also when the 10
th
foul is recorded, the opposing team’s DOUBLE BONUS indicator turns ON. This
feature can be turned OFF and all Bonus indicators controlled manually as above if desired. If a BONUS
indicator comes on automatically and is not wanted, use the BONUS key to turn it OFF. Note: The AUTO
BONUS feature can be turned OFF at any time from the SET OPTIONS menu. It will remain OFF until
the control is powered OFF and then started fresh by entering the Model Code.
bonus
Next
Poss.
Team
Fouls
Team
Fouls
To Next Page
Loading...
