EasyManua.ls Logo

New England Arbors Vienna User Manual

New England Arbors Vienna
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at
1 800 282 9346 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
(UK Tel: (44) 2038 687160
(Mon. to Fri. 1:00 PM to 10:00 PM GMT).
1.
Keystone Lid
(1) - 10668-1
2.
Keystone Insert
(1) - 10837
3. Keystone Body (1)
- 10836
4. Keystone Bottom Plate
(1) - 10666-1
5. Arch Spindle - Long
(2) - 10878
6. Arch Spindle - Short
(2) - 10879
7.
Arches (2) - Left 10880 , Right 10881
8. Post Caps (2) - Left 10673-1 , Right 10674-1
9.
Top Rail
(1) - 10882
10.
Posts
(2) - Left 10883 , Right 10884
11.
Vertical Spindles
(7) -
10885
12.
Horizontal Spindles
(3) - 10886
13.
Bottom Rail
(1) - 10887
14.
Ground Mounting Extensions
(2) - 10888
15.
1 1/2” [38 mm] Self-Auguring Stainless Steel Screws
(20) - 20005
Tools You Will Need
Cordless Drill
Hammer
Tape Measure
Level
Shovel
General Information
Read Instructions through carefully before beginning assembly.
When
assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
We recommend an area approx 5’x 8’ (1.5 m x 2.4 m) for unobstructed assembling.
You should not need to use excessive force when assembling component.
The Vienna Trellis
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
1
1
2
15
Not to Scale
6
3
4
5
IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS.
V1.4/072717
14
83.75 in
(212.7 cm)
49 in (124.5 cm)
42 in (106.7 cm)
6 in
(15.2 cm)
49 in
(124.5 cm)
2 in
(5.1 cm)
7
8
9
10
11
12
13
www.newenglandarbors.com
www.newenglandarbors.co.uk
Question and Answer IconNeed help?

Do you have a question about the New England Arbors Vienna and is the answer not in the manual?

New England Arbors Vienna Specifications

General IconGeneral
MaterialVinyl
ColorWhite
StyleTraditional
Assembly RequiredYes
CategoryArbor
Weight50 pounds

Summary

The Vienna Trellis Assembly

Step One: Initial Rail and Spindle Assembly

Lay out rails and vertical spindles, insert into horizontal rails and posts, and fasten with screws.

Step Two: Arch Assembly

Assemble keystone body with insert, then fasten arches to insert using screws and secure with lids.

Step Three: Attaching Arches to Posts

Place post caps, insert arch spindles into top rail, guide arch assembly into posts, and fasten with screws.

Step Four: Install Ground Mounting Extensions

Insert ground mounting extensions into the bottom of the trellis posts and secure them with screws.

Step Five: Install Trellis into Ground

Position trellis, excavate holes, place trellis, level, and backfill with excavated soil.

Related product manuals