34
PHS[ ]?
Set and query the phase delay.
The PHS command sets and queries the phase shifter. The data may range
from -180.0 to +179.0 degrees. Do not use a decimal point in the data.
PHS-1234 (Sets the phase shift to -123.4 degrees.)
PHS?
—>PHS-123.4
PHS222 (Sets the phase shift to 22.2 degrees.)
Command
Description
Explanation
Example
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...