C70 Digital Readout System
The Menu Function
SPECIAL FUNCTIONS, The Menu Function
If certain functions are
running when you
press , then in place
of the function name,
the display will show
.
Press again to turn
the Menu off, if you
want to allocate a
different function to that
function key, then turn
the function off before
trying again.S
Newall Measurement Systems Ltd 15
Only two Special Functions are available for use at any one time.
To find out which function is allocated to each key:
• Press to see the Menu.
The display shows,
• Press again to turn the Menu off.
To use a function:
• Press , or , according to the instructions given later in this guide.
To allocate a function to a key:
• Press .
• Press the Select Key next to the or to choose which function key to edit.
• Press or to cycle up and down the list of Special Functions.
• Press to allocate the selected Special Function to the function key.
Note: The C70 has no special functions programmed as standard. Please see the Newall Website:
www.newall.com to see what new features may be available
To Next Page
Loading...
