Newco LCD-TCH - Machine Calibration and Recipe Management; Coffee Valve Calibration Process; Recipe Entry and Editing; Creating and Saving Drink Recipes

15
Programming-Cont’d
TAP 3 TIMES ON CENTER OF “L”
THEN TAP 3 TIMES ON CENTER OF
“D”
TO ENTER SECONDARY
PROGRAMMING MODE
IF A BREWING ICON IS ACCIDENTLY
TOUCHED USE THE RETURN ARROW
TO TRY AGAIN
SECONDARY PROGRAMMING MODE (SERVICE MENU)
RECIPES AND CALIBRATION
Coffee Valve Calibration-- Insert a
measuring container capable of holding 32
or more ounces of water under delivery area
of machine, and press “Start Cal Cycle”
button to start calibration countdown period
. After cycle has completed use the + and -
buttons to toggle the value, increasing or
decreasing value until the display number
matches the amount of the water measured
in Ounces. Default is 10 oz.
CALIBRATION
Recipe Entry—See Page 16