CONEX-AGAP Agilis-D Controller with Strain Gages Feedback
2.0 LabVIEW Drivers Used in the NSTRUCT Environment
2.1 Finding the Newport Instrument LabVIEW Driver
With NSTRUCT, a folder is created from “Program files” for each instrument in
\NSTRUCT\Instruments folder.
From the selected instrument directory, a “LabVIEW” directory contains the
LabVIEW driver.
C:\Program Files\Newport\Instrument Manager\NSTRUCT\Instruments\CONEX-
AGAP\LabVIEW
The “Lib” folder contains the assemblies necessary for the LabVIEW project:
A LabVIEW project will be provided with two important VIs: “Connect” and
“Disconnect”.
Page 3 EDH0293En1020 — 09/12
To Next Page
Loading...
