Newport CONEX - AGAP - Adding Newport Instrument Menu to Labview

CONEX-AGAP Agilis-D Controller with Strain Gages Feedback
2.2 Adding Newport Instrument menu to LabVIEW
A menu file (.mnu) for LabVIEW is provided for each instrument.
NOTE
This menu must be copied in the directory “user.lib” of your LabVIEW.
This menu allows you to access to each instrument driver when the “User libraries” is
selected from the LabVIEW functions panel.
For each instrument, three VIs are available:
 Co
nnect to the instrument
 Disconnect from the instrument
 Node of method (.NET) to access to all instrument commands
EDH0293En1020 — 09/12 Page 4