ESP301 Controller GUI Manual
3.0 User Interface
3.1 Configuration
The Configuration tab allows the user to view and / or change information related to the
logging configuration and the instrument settings. Read only values are displayed for
the log file name and the log file path.
The logging level may be changed to any of the settings in the drop-down list on the
right hand side. Trace is the most detailed of the settings and when this setting is
selected, the GUI logs everything. Critical Error is the least detailed of the settings and
when selected, the GUI will only log errors that are defined to be critical.
The polling interval defines the number of milliseconds between each time the GUI
polls the ESP301 for the latest information. The user may change the polling interval
by entering a value.
The Save button saves the current settings to the configuration file.
EDH0282En1030 — 01/17
3
To Next Page
Loading...
