Newport ESP301 - Axis Control

ESP301 Controller GUI Manual
Configurable settings
The following table describes all the settings that can be changed by the user.
Parameter
Description
Values
Default
LoggingConfiguration
Level
Logging level. Trace is the most
detailed of the settings and when this
setting is selected, the GUI logs
everything. Critical Error is the least
detailed of the settings and when
selected, the GUI will only log errors
that are defined to be critical.
Trace Detail
Equipment
Message Info
Warning
Error Critical
Error
Trace
InstrumentInformation
PollingFrequency
The polling interval defines the
number of milliseconds (delay)
between each time the GUI polls the
instrument for the latest information.
An Integer
200
Diagnostics
Delay
The Delay defines the number of
milliseconds (delay) between each
command from a file of commands in
the diagnostics tab.
An Integer
1000
Models\InstrumentInfo
CommunicationChannel
The communication channel
USB
USB
MemorizedPositionRollingBuffer
BufferDepth
MaxItem defines the maximum
number of memorized positions by the
GUI.
5
Positions
The list of the memorized position.
The format is "Name of position #1;X
position #1;Y position
#1;Name of position #2;X position
#2;Y position #2…"
3.2 Axis
The combo box at the top of the window allows the selection of axes (1 to 3).
EDH0282En1030 — 01/17
4