December 2019 90 LDC-3706 Series Laser Controller
Chapter 5:
Troubleshooting and Calibration
This chapter will help resolve any problems that may be experience with the LDC-3706 Laser
Controller quickly. If additional assistance is needed, please contact ILX Lightwave Customer
Service. See page ix for contact information.
ILX Lightwave Corporation provides in-house calibration services for ILX instruments.
International customers may contact our service centers for regional calibration support. Most
ILX instruments, including the LDC-3706 instruments, require yearly calibration to ensure
performance to published specifications. ILX factory calibrations employ NIST traceable
measurement instrumentation, and our calibration engineers and technicians use automated
test equipment to accurately and efficiently capture and record calibration data. An original
certificate of calibration authenticity is provided with all instrument calibrations, and a detailed
report showing any pre-calibration out-of-tolerance conditions is available upon request.
Calibration turn-around times are normally five business days or less. Please contact ILX
Customer Support (see Comments, Suggestions, and Problems on page ix for contact
information) for additional calibration information.
For further assistance with technical solutions and troubleshooting, visit us online at
www.newport.com/b/ilx-lightwave.
To Next Page
Loading...
Need help?
General
