Newport LDC-3706 Series - Safety Symbols

December 2019 vi LDC-3706 Series Laser Controller
Safety Symbols
This section describes the safety symbols and classifications.
Technical specifications including electrical ratings and weight are included within the manual. See
the Table of Contents to locate the specifications and other product information. The following
classifications are standard across all ILX Lightwave products:
 Indoor use only
 Ordinary Protection: This product is NOT protected against the harmful ingress of
moisture.
 IEC Class I Equipment (grounded type)
 Mains supply voltage fluctuations are not to exceed ±10% of the nominal supply voltage.
 Pollution Degree II
 Installation (overvoltage) Category II for transient over-voltages
 Maximum Relative Humidity: <85% RH, non-condensing
 Operating temperature range of 10 °C to 40 °C
 Storage and transportation temperature of –40 °C to 70 °C
 Maximum altitude: 3000 m (9843 ft.)
 This equipment is suitable for continuous operation.