Newport LDC-3706 Series User Manual

December 2019 1 LDC-3706 Series Laser Controller
Chapter 1:
Introduction and Specifications
This chapter is an introduction to the LDC-3706 Laser Controllers and contains unpacking
information, instructions on how to install and apply power, maintenance information,
specifications and listings of the LDC-3706 instrument options and accessories.
 Safety Considerations and unpacking information
 Product Overview
 Options and accessories
 Specifications
Safety Considerations
If any of the following symptoms exist, or are even suspected, remove the LDC-3706 from
service. Do not use the LDC-3706 instrument until trained service personnel can verify
safe operation.
 Visible damage
 Severe transport stress
 Prolonged storage under adverse conditions
 Failure to perform intended measurements or functions
If necessary, return the LDC-3706 instrument to ILX Lightwave for service and repair to
ensure that safety features are maintained.
Initial Inspection
When the LDC-3706 Laser Controller is received, verify that the following items were shipped with
the instrument:
 Power Cord
 Shipping Kit
 LNF-320 Low Noise Filter (LDC-3736 only)
 50-Ohm BNC terminator (LDC-37620 only)
Shipping Kit
The shipping kit for the LDC-3706 instrument includes a USB A/B cable and a USB Flash Drive
containing the ILX Lightwave USB Driver, and product manual.

Newport LDC-3706 Series Specifications

General

Brand	Newport
Model	LDC-3706 Series
Category	Controller
Language	English