Newport LDC-3706 Series - Page 81

December 2019 69 LDC-3706 Series Laser Controller
CALCulate:TRANsform:TEMPerature:CVDusen:R <nrf> TEC
CALCulate:TRANsform:TEMPerature:CVDusen:R?
Description Sets/Reports coefficient R0 (CVD R0) for the Callender-Van Dusen RTD resistance-to-temperature equation.
Parameters 0 – 9999.9  - The resistance of the transducer at 0 °C.
Notes The Callendar-Van Dusen equation:


= 

󰇟
1+ + 

+ 

󰇛
−100
󰇜
󰇠
( < 0 °C)


= 

󰇟
1+ + 

󰇠
(  0 °C)
Where 

is the resistance at temperature .
Reset Value 100
Example CALC:TRAN:TEMP:CVD:R 100; Sets CVD:R to 100 .
CALCulate:TRANsform:TEMPerature:ICI:OFFSet <nrf> TEC
CALCulate:TRANsform:TEMPerature:ICI:OFFSet?
Description Sets/Reports offset compensation for a temperature to current transducer.
Parameters -9.999 – 9.999 – The compensating offset in °C.
Reset Value 0.0
Example CALC:TRAN:TEMP:ICI:OFFS 0; Sets the ICI sensor offset to 0 °C.
CALCulate:TRANsform:TEMPerature:ICI[:GAIN] <nrf> TEC
CALCulate:TRANsform:TEMPerature:ICI[:GAIN]?
Description Sets/Reports slope compensation for a temperature to current transducer.
Parameters 0 – 9.999 – The compensating slope.
Reset Value 1.0
Example CALC:TRAN:TEMP:ICI 1.0; Sets the ICI sensor slope to 1.0.
CALCulate:TRANsform:TEMPerature:ICV:OFFSet <nrf> TEC
CALCulate:TRANsform:TEMPerature:ICV:OFFSet?
Description Sets/Reports offset compensation for a temperature to voltage transducer.
Parameters -99.99 – 99.99 – The compensating offset in °C.
Reset Value 0.0
Example CALC:TRAN:TEMP:ICV:OFFS 0; Sets the ICV sensor offset to 0°C.
CALCulate:TRANsform:TEMPerature:ICV[:GAIN] <nrf> TEC
CALCulate:TRANsform:TEMPerature:ICV[:GAIN]?
Description Sets/Reports slope compensation for a temperature to voltage transducer.
Parameters -99.99 – 99.99 – The compensating slope.
Reset Value 10.0
Example CALC:TRAN:TEMP:ICV 10.0; Sets the ICV sensor slope to 10.