16 Safety Precautions
WARNING
The Model 8742 Picomotor Controller/Driver internally generates
non-SELV voltages. These voltages are present, at times, on the
Picomotor connectors even when a Picomotor is not connected.
The user shall mount the Model 8742 with appropriate barriers,
spacings, markings, etc. to ensure that all applicable regulatory
requirements are met. THIS IS THE USER’S RESPONSIBILITY.
WARNING
Do not attempt to operate this equipment if there is evidence of
shipping damage or you suspect the unit is damaged. Damaged
equipment may present additional hazards to you. Contact New
Focus technical support for advice before attempting to plug in
and operate damaged equipment.
WARNING
The Model 8742 is intended for use ONLY with New Focus
Picomotors. Connection of other devices to the unit’s motor
connectors may cause damage to the unit or the connected
device, fire, and/or personal injury.
WARNING
Before operating the Model 8742 Picomotor Driver, please read
and understand all of Section 1.
WARNING
Do not attempt to operate this equipment if there is evidence of
shipping damage or you suspect the unit is damaged. Damaged
equipment may present additional hazards to you. Contact New
Focus technical support for advice before attempting to plug in
and operate damaged equipment.
WARNING
Do not apply external DC power to this equipment in excess of
14.5 VDC.
WARNING
Use only the New Focus-supplied MAINS power cord with the
external DC power supply. Use of an under-rated power cord
may cause damage to the product, fire, and/or personal injury.
To Next Page
Loading...
Need help?
General
