Newport OPHIR Photonics Spiricon Pyrocam IV User Manual

Pyrocam IV Operator’s Manual Document No. 50337-001 Rev F 2/21/2017 Page 37
Turn it On
In general, you will always operate the Pyrocam with bad pixel correction turned ON.
The default setting of the bad pixel correction control is ON, and will remain so unless
you override it in a saved setup.

Newport OPHIR Photonics Spiricon Pyrocam IV Specifications

General

Brand	Newport
Model	OPHIR Photonics Spiricon Pyrocam IV
Category	Measuring Instruments
Language	English