Newport OPHIR Photonics Spiricon Pyrocam IV - Page 44

Pyrocam IV Operator’s Manual Document No. 50337-001 Rev F 2/21/2017 Page 44
GainCorrection
RW
Enables and disables Gain
Correction inside the camera.
bool
False
TriggerPeriod
RO
Number of microseconds
between triggers.
uint
SkippedTriggers
RO
Number of triggers skipped
between frame capture.
uint
FirmwareVersion
RO
Firmware version encoded as
hex number 0xMMmmbbrr
where:
MM = major version
mm = minor version
bb = build number
rr = revision
uint
0x01000001
FPGAChecksum
RO
Simple checksum of FPGA
stored in the flash
uint
HardwareRevision
RO
Hardware Revision
enum
A
MaxGain
RO
Maximum allowable Gain
value for this camera
float
1.0 – 8.0
* RO = Read-Only, RW = Read/Write, WO = Write-Only