4.3.2 Get Readings from the End Device
Once you see the End Device’s LED blinking periodically, it means it is sending
data which will appear on the "Readings" page. To view the data in a chart
format, you can use the "Chart" page.
Click on from the Home Page, the following page will appear, showing
updates of the Process and Ambient Temperature.
Figure 4.7 Readings
While accessing the "Readings" page, If a blank screen appears without
any "java application running" or image of a "Java logo", please verify you
have the latest Java Runtime Environment installed and configured
according to the Section 4.3.3.1. If you do not have Java Runtime
Environment, you may download it from our website or contact the
Customer Service Department nearest you.
The "Readings" fields are defined as follows:
Title
: Meter’s name, assigned in Network Setup Menu.
Name
: End Device’s name, assigned in End Device Setup Menu.
Reading Values
: The order from left to right is Process Temperature, then Ambient.
First Reading: Process - process temperature reading with temperature unit.
Second Reading: Ambient - built-in sensor temperature reading with
temperature unit.
Reading "Open" indicates that no sensing device is detected.
wiSeries
Lab 200
Lab 100
ID: 1 Strength: 100%Sequence: 10 Success: 100% Battery: 3.78V Update: 120sec Running
ID: 2 Strength: 94%Sequence: 24 Success: 100% Battery: 3.67V Update: 120sec Running
7073
6877
Lab 700
F
F
F
F
F
F
ID: 7 Strength: 21%Sequence: 28 Success: 100% Battery: 3.67V Update: 120sec Running
7578
Process Ambient
Data Logging: INACTIVE
Main Menu
Refresh seconds
5
Readings
27
To Next Page
Loading...
