Peak 650 User's Guide Rev. A October 2000
Introduction
1-3
system, utilize all of the system memory to support richer graphics applications.
!
BIOS
!
Award System BIOS
!
Plug & Play support
!
Advanced Power Management support
!
Advanced Configuration & Power Interface support
!
Jumperless for CPU FSB
!
2M bits flash ROM, upgradeable to 4M bits
!
Chip Set
!
Intel 815E chipsets
82815
×
1 Graphics and Memory Controller Hub (GMCH)
82801
×
1 I/O Controller Hub (ICH2)
82802
×
1 Firmware Hub (FWH)
!
ITE 8888F
×
1 PCI to ISA Bridge
!
On Board VGA
!
Intel 82815 (GMCH) chipset integrated with Graphics controller
!
Hardware motion compensation assist for software MPEG/DVD decode
!
15 pin CRT connector
×
1
!
On Board optional VGA
!
ATI Rage Mobility M4 3D VGA accelerator. 4X AGP
!
Fully PC 98 and PC 99 Compliant.
!
Integrated 8MB of SDR Memory, upgradeable to 16MB
!
15 pin CRT connector
×
1, DVI interface connector
×
1
!
On Board LAN
!
Dual channel Ethernet support
!
Intel 82801 (ICH2) chipset integrated LAN controller
!
Intel 82559 Single Ethernet controller
!
Alert-on-LAN by Intel 82801 ( ICH2)
!
10 Base T/100 Base TX support, full duplex
!
Complied with PCI V2.1, IEEE802.3, IEEE 802.3U
!
Drivers supportDOS/Windows, Windows 95/98/2000, Windows NT4.0, Netware, SCO Open Server
5.0, Linux.
!
RJ45 connector
×
2
To Next Page
Loading...
