nextys DCW20 - Alarms

DCW20 User Manual rev. 5
Page 30/34
4.4.1.5 Cold start
LCD name
Modbus address
Cold start
0x4021
Value1
Value2
Inactive (0), Active (1)
Not used
DCW20 has powered ON through cold start (see §3.1.6).
4.4.1.6 PC shutdown
LCD name
Modbus address
PC shutdown
0x4022
Value1
Value2
Inactive (0), Active (1)
Not used
Command to shutdowns the PC (see §3.1.5).
4.4.1.7 PC power off
LCD name
Modbus address
PC power OFF
0x4023
Value1
Value2
Inactive (0), Active (1)
Not used
Command to power OFF the PC (see §3.1.5), DCW20 output switches OFF.
4.4.1.8 External temperature sensor presence
LCD name
Modbus address
Ext. T sensor presence
0x4024
Value1
Value2
Inactive (0), Active (1)
Not used
Active if the optional external temperature sensor is connected.
4.4.1.9 Inhibit
LCD name
Modbus address
Inhibit
0x4025
Value1
Value2
Inactive (0), Active (1)
Not used
Active if the inhibit input signal is asserted (see §3.4).
4.4.1.10 Output disabled
LCD name
Modbus address
Output disabled
0x4026
Value1
Value2
Inactive (0), Active (1)
Not used
Active if the output is disabled in settings.
4.4.1.11 Auxiliary output disabled
LCD name
Modbus address
Aux disabled
0x4027
Value1
Value2
Inactive (0), Active (1)
Not used
Active if the auxiliary output is disabled in settings.
4.4.2 Alarms
4.4.2.1 Battery disconnected
LCD name
Modbus address
Bat. disconnected
0x4010
Value1
Value2
Inactive (0), Active (1)
Not used
Active when no battery is detected by DCW20.
DCW20_040-02-700-005-EH-1117