12
3.2 NDIM Configuration
• NDIM type set to Automatic for enabling automatic DOD selection functionality and set to Manual for
manual configuration of DOD.
• Domain ID (DOD) manually set the DOD number from 1 to 15 to use a different preamble seed than
the default 0.
3.3 Encryption Configuration via WEB UI
• Node security configuration: Domain Name and Encryption Configuration (Encryption Password
String) of selected node can be read and updated. There is also a label to indicate if the security keys
of the pairing process have been successfully received. Finally the pairing/unpairing order can be sent
to the node. It is the same behavior as the “Config” button.
Available Connections
• In this tab table, all the available G.hn connections are presented. Remote node DID and MAC
address, transmission and reception physical speeds.
To Next Page
