Nexx XCOM3 PRO - Starting Mesh Intercom; Using the Mesh in Open Mesh; Channel Setting (Default: Channel 1)

X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM WITH MESH INTERCOM
26
7.2 STARTING MESH INTERCOM
When Mesh Intercom is enabled, the headset will automatically connect to
nearby users and allow them to talk to each other.
Mesh Intercom On
1x
TAP
Blinking
“ Mesh intercom on,
Open Mesh, channel 1”
Mesh Intercom Off
1x
TAP
“ Mesh intercom off”
7.3 USING THE MESH IN OPEN MESH
When Mesh Intercom is enabled, the headset will be in Open Mesh
(default: channel 1) initially.
7.3.1 Channel Setting (Default: channel 1)
If the Open Mesh communication experiences interference because other
groups are also using channel 1 (default), change the channel. You can
select from channels 1 to 9.
1. Double tap the Mesh Intercom Button.
2x
TAP
“ Channel setting, 1”
2. Navigate between channels.
(1
2 ••• 8 9 Exit 1 •••)
1x
TAP
or
1x
TAP
“#”