Nexx XCOM3 PRO - Page 4

X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM WITH MESH INTERCOM
10 USING THE FM RADIO 43
10.1 FM RADIO ON/OFF 43
10.2 SEEK AND SAVE RADIO STATIONS 43
10.3 SCAN AND SAVE RADIO STATIONS 44
10.4 TEMPORARY STATION PRESET 44
10.5 NAVIGATING PRESET STATIONS 45
11 VOICE COMMAND 46
12 FUNCTION PRIORITY AND FIRMWARE UPGRADES 48
12.1 FUNCTION PRIORITY 48
12.2 FIRMWARE UPGRADES 48
13 CONFIGURATION SETTING 49
13.1 HEADSET CONFIGURATION MENU 49
13.1.1 Delete All Pairings 49
13.1.2 Remote Control Pairing 49
13.2 SOFTWARE CONFIGURATION SETTING 50
13.2.1 Headset Language 50
13.2.2 Mesh Reach-Out (Default: Disable) 50
13.2.3 Audio Equalizer (Default: Music Balance) 50
13.2.4 Audio Boost (Default: Enable) 50
13.2.5 VOX Phone (Default: Enable) 51
13.2.6 VOX Intercom (Default: Disable) 51
13.2.7 VOX Sensitivity (Default: 3) 51
13.2.8 HD Intercom (Default: Enable) 51
13.2.9 HD Voice (Default: Enable) 52
13.2.10 Bluetooth Intercom Audio Multitasking (Default: Disable) 52
13.2.11 Intercom-Audio Overlay Sensitivity (Default: 3) 53
13.2.12 Audio Overlay Volume Management (Default: Disable) 53
13.2.13 Smart Volume Control (Default: Disable) 53
13.2.14 Sidetone (Default: Disable) 53
13.2.15 Voice Assistant (Default: Enable) 53
13.2.16 Voice Prompt (Default: Enable) 54
13.2.17 RDS AF Setting (Default: Disable) 54
13.2.18 FM Station Guide (Default: Enable) 54
13.2.19 Advanced Noise Control™ (Default: Enable) 54
13.2.20 Region Selection 54
14 TROUBLESHOOTING 55
14.1 FACTORY RESET 55
14.2 FAULT RESET 55
15 QUICK REFERENCE 56