45
Troubleshooting
4. The correct movement produced but a higher output level is required
Fault Action
Incorrect electrode placement Refer to electrode placement instructions
Poor electrode condition Replace electrodes
Poor electrode contact Dampen the electrodes and skin with water
Muscle fatigue Rest
Failing battery Replace (or recharge)* the battery
5. The stimulator does not turn on
Fault Action
Battery empty Replace (or recharge)* the battery
Battery not present Install battery
Battery incorrectly inserted Change battery orientation
Battery cap not removed Remove battery cap
Battery contacts damaged Return to supplier
Stimulator faulty Return to supplier
Impact or water damage Return to supplier
6. Interference from other wireless devices
Fault Action
Intermittent or no wireless connection to
wireless accessories.
Move away from potential source of
interference
Turn the system and wireless accessories
o and on.
Create a new network or if using a remote
control follow instructions supplied with this
device. Refer to page 39 for create network.
*Do not try to recharge non-rechargeable batteries. Only charge batteries in a charger
suitable for the battery chemistry.
5
To Next Page
Loading...