40
Cleaning and Care Guidance
Many of the components of the system can be cleaned. The system does not require regular
cleaning, only as necessary. Please follow the instructions below.
Remove the battery before cleaning the system.
Do not scrub with abrasive material
Make sure all parts are dry before re-use.
Stimulator
The ODFS
®
Pace (XL) stimulator can be cleaned by wiping with a damp cloth or anti-bacterial
wipes.
Do not immerse the stimulator in water
Do not clean with solvents.
Remove any debris within the battery compartment by hand. Ensure that debris does not get
between the battery contacts and battery terminals.
Electrodes
To clean electrodes, dampen the surface of the electrodes with water by running two
ngers under a tap then wiping across the electrode a couple of times.
Do not use a cloth to clean the electrode gel.
Do not immerse electrodes in water.
Do not use soap
Leads and footswitches
Use anti-bacterial wipes to clean these components, or they can be cleaned using a damp
cloth soaked in water.
If parts are very dirty or can not be easily cleaned, replace with new.
55
To Next Page
Loading...