Part Number 12762 Rev 1.1 | April 30, 2014
INSTALL GUIDE
NETWORK CONTROLLER 3E & 6E
MOUNTING AND WIRING GUIDE
14
The JACE-3E and JACE-6E controllers
are compact, embedded
controller/server platforms that allow
integrated control and management of
external devices over the Internet.
The JACE-3E uses a PowerPC 405
400Mhz processor; the JACE-6E uses a
PowerPC 440 524Mhz processor.
Each controller supports two optional
communications cards as well as
optional I/O expansion modules.
Onboard static RAM (SRAM) provides
NiagaraAX station backup capability
without any battery installed. An
optional backup battery is also
available.
To Next Page
Need help?
General
