Document information
This technical manual is a complement to the Installer
handbook for F1245, containing:
■
Description of functions and component description.
■
Information to facilitate fault-tracing.
■
Instructions for replacing components.
■
Supplementary technical information.
The document applies to heat pumps with software
version 7968R2.
The heat pump software version can be found in the info
menu (menu 3.1).
Safety information
This manual describes installation and service procedures
for implementation by specialists.
This appliance can be used by children
aged from 8 years and above and per-
sons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and under-
stand the hazards involved. Children shall
not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.
Rights to make any design or technical
modifications are reserved.
©NIBE 2017.
Symbols
NOTE
This symbol indicates danger to person or ma-
chine .
Caution
This symbol indicates important information
about what you should observe when maintain-
ing your installation.
TIP
This symbol indicates tips on how to facilitate
using the product.
Marking
The CE mark is obligatory for most products sold
in the EU, regardless of where they are made.
CE
Classification of enclosure of electro-technical
equipment.
IP21
Danger to person or machine.
Read the User Manual.
Serial number
The serial number can be found at the bottom right of
the front cover and in the info menu (menu 3.1).
Caution
You need the product's (14 digit) serial number
for servicing and support.
F1245Chapter 1 | Important information4
1 Important information
To Next Page
Loading...
Need help?
General
