Menu 4 – HEAT
PUMP
OVERVIEW
4.1.1 - pool 1 *4.1 - plus functions *4 - HEAT PUMP
4.1.2 - pool 2 *
4.1.3.1 - NIBE Uplink4.1.3 - internet
4.1.3.8 - tcp/ip settings
4.1.3.9 - proxy settings
4.1.4 - sms *
4.1.5 - SG Ready
4.1.6 - smart price adaption
4.1.8.1 - settings
4.1.8 - smart energy
source™
4.1.8.2 - set. price
4.1.8.3 - CO2 impact
4.1.8.4 - tariff periods, elec-
tricity
4.1.8.5 - tariff periods, fixed
price
4.1.8.6 - tariff per, ext. shunt
add
4.1.8.7 - tariff per, ext. step
add
4.1.8.8 - tariff periods,
OPT10
4.1.11 -
demand-contr. ventil.
*
4.2 - op. mode
4.3 - my icons
4.4 - time & date
4.6 - language
4.7 - holiday setting
4.9.1 - op. prioritisation4.9 - advanced
4.9.2 - auto mode setting
4.9.3 - degree minute set-
ting
4.9.4 - factory setting user
4.9.5 - schedule blocking
* Accessory needed.
Sub-menus
For the menu HEAT PUMP there are several sub-
menus. Status information for the relevant menu can
be found on the display to the right of the menus.
plus functions Settings applying to any installed extra
functions in the heating system.
op. mode Activation of manual or automatic operating
mode. The status information shows the selected oper-
ating mode.
my icons Settings regarding which icons in the heat
pump's user interface that are to appear in the slot when
the door is closed.
time & date Setting current time and date.
language Select the language for the display here. The
status information shows the selected language.
holiday setting Vacation scheduling heating, hot water
and ventilation. Status information "set" is displayed if
you set a vacation schedule but it is not active at the
moment, "active" is displayed if any part of the vacation
schedule is active, otherwise it displays " off".
advanced Setting heat pump work mode.
MENU 4.1 - PLUS FUNCTIONS
Settings for any additional functions installed in F1345
can be made in the sub menus.
23Chapter 3 | Control - MenusNIBE F1345
To Next Page
Loading...
