affect pool temperature
Setting range: 1 - 10
Factory setting: 2
affect cooling
Setting range: 1 - 10
Factory setting: 3
price of electricity overview
Here you can obtain information on how the electri-
city price varies over up to three days.
In menu Smart price adaption™ you state where the
heat pump is located and how great a role the electricity
price should play. The greater the value, the greater the
effect the electricity price has and the larger the possible
savings, but at the same time there is an increased risk
of affecting comfort.
Smart price adaption™ moves the heat pump's consump-
tion over 24 hours to periods with the cheapest electri-
city tariff, which gives savings for hourly rate based
electricity contracts. The function is based on hourly
rates for the next 24 hours being retrieved via NIBE
Uplink and therefore an internet connection and an ac-
count for NIBE Uplink are required.
Deselect "activated" to switch off Smart price adaption™.
MENU 4.1.8 - SMART ENERGY SOURCE™
settings
set. price
CO2 impact*
tariff periods, electricity
tariff periods, fixed price**
tariff per, ext. shunt add
tariff per, ext. step add
tariff periods, OPT10
The function prioritises how / to what extent each
docked energy source will be used. Here you can choose
if the system is to use the energy source that is
cheapest at the time. You can also choose if the system
is to use the energy source that is most carbon neutral
at the time.
*Select control method "CO
2
" under settings to open this menu.
**Select "spot" under set. price to open this menu.
MENU 4.1.8.1 - SETTINGS
smart energy source™
Setting range: Off/On
Factory setting: Off
control method
Setting range: Price / CO
2
Factory setting: Price
MENU 4.1.8.2 - SET. PRICE
price, electricity
Setting range: spot, tariff, fixed price
Factory setting: fixed price
Setting range fixed price: 0–100,000*
price, extern shunt add.
Setting range: tariff, fixed price
Factory setting: fixed price
Setting range fixed price: 0–100,000*
price, extern step add.
Setting range: tariff, fixed price
Factory setting: fixed price
Setting range fixed price: 0–100,000*
price, OPT addition.
Setting range: tariff, fixed price
Factory setting: fixed price
Setting range fixed price: 0–100,000*
Here you can choose whether the system is to exercise
control based on the spot price, tariff control or a set
price. The setting is made for each individual energy
source. Spot price can only be used if you have an hourly
tariff agreement with your electricity supplier.
*The currency varies depending on the country selected.
NIBE F1345Chapter 3 | Control - Menus26
To Next Page
Loading...
