Nibe F2040 User Manual

F2040 - An excellent choice
F2040 is an air/water heat pump specially developed for the Nordic climate,
which utilises the outside air so there is no need for bore holes or coils in
the ground.
The heat pump is intended for connection to water borne heating systems
and can both heat hot water effectively at high outdoor temperatures
and give a high output to the heating system at low outdoor temperatur es.
If the outdoor temperature drops to a level below the stop temperature
all heating must then occur with external additional heat.
Excellent properties for F2040:
႑
Efficient twin rotary compressor
Efficient twin rotary compressor that operates at temperatures down
to -20 °C.
႑
Intelligent control
F2040 connected to intelligent control for optimum control of the heat
pump.
႑
Fan
F2040 has automatic capacity regulation of the fan.
႑
Long service life
The material has been chosen for a long service life and is designed to
withstand the Nordic outdoor conditions.
The material has been chosen for a long service life.
႑
Many possibilities
F2040 can with a NIBE hot water module, be used together with most
electric boilers, oil boilers or similar.
႑
Silent operation
F2040 has a silent operation function that allows scheduling when
F2040 must operate at an even quieter noise level.
9NIBE™ F2040Chapter 1 | Important information

Nibe F2040 Specifications

General

Type	Air/water heat pump
Refrigerant	R410A
Operating Temperature Range Heating	-20°C to 35°C
Operating Temperature Range Cooling	10°C to 46°C
Sound Power Level	56-62 dB(A) (depending on model)