Nibe F2040 User Manual

Contact with F2040
F2040 has an integrated control system that controls and monitors the
heat pump operation. At installation the installation engineer makes the
necessary settings of the control system on the indoor module, so that the
heat pump works optimally in your system.
The heat pump is controlled in different ways depending on your system.
If you have an indoor module, e.g. VVM 310 or VVM 320, you can control
heat pump operation from it. See relevant manual for more information.
NIBE™ F2040Chapter 2 | The heat pump – the heart of the house12

Nibe F2040 Specifications

General

Type	Air/water heat pump
Refrigerant	R410A
Operating Temperature Range Heating	-20°C to 35°C
Operating Temperature Range Cooling	10°C to 46°C
Sound Power Level	56-62 dB(A) (depending on model)