Readjusting, heating medium
side
Air is initially released from the hot water and venting
may be necessary. If bubbling sounds can be heard from
the heat pump, the circulation pump and radiators the
entire system will require further venting. When the
system is stable (correct pressure and all air eliminated)
the automatic heating control system can be set as re-
quired.
Adjustment, charge flow
Instructions for adjusting hot water charging can be
found in the Installer Manual for the respective indoor
module / control module. See page Accessories for the
list of the indoor modules, control modules and accessor-
ies that can be connected to HBS 05.
HBS 05Chapter 6 | Commissioning and adjusting30
To Next Page
Loading...
