Nibe PELLUX 200 - 8 Technical Specifications; Pellux 100 Boiler; PBMAX Burners

18 PELLUX 200 TOUCH
EN
8 Technical Specications
Pellux 200 boiler
PBMAX burner
Technical parameters Unit PBMAX 20.1
Burner capacity kW 6 ÷ 20 kW
Fuel mm
Ø 6 ÷ 10 / max. length 30
Power supply V 1/N/PE 230 V, 50 Hz
Electric power W
40
Electric power at start-up W
650
Degree of protection -
IP 21
Net weight kg
14,5
Technical parameters Unit
PELLUX 200
(K-PAA 25)
Boiler class - 5
Rated power kW 20
Net weight kg 202
Water capacity l 190
Power supply V 1/N/PE 230 V, 50 Hz
Boiler efciency % 90 - 92
Boiler temperature range °C 60-80
Operating temp max °C 85
Return temp min (at the boiler inlet) °C 45
Flue gas temp °C 80 ÷ 150
Noise level dB 48 dB
Outlet mm ø127
Pressure max MPa (bar) 0.25 (2.5)
Flue gas draught required Pa 18 ÷ 20
Length of combustion chamber mm 320 mm
Degree of protection - IP 21
Chimney diameter mm 130-160
Chimney height (recommended) m 7 m
Power consumption in standby mode W 13 W
Power consumption at nominal power W 43 W
Power consumption at min power W 20 W
Flue gas mass ow – at rated power kg/h 42 kg/h
Flue gas mass ow – at min power kg/h 18 kg/h
Pressure drop at the boiler – Δ10 °C mbar 2
(1)
mbar
Pressure drop at the boiler – Δ20 °C mbar 6
(3)
mbar
(1) at Q = 0,8 m3/h, (2) at Q = 1,3 m3/h, (3) at Q = 1,6 m3/h, (4) at Q = 2,5 m3/h
Chapter 8 | Technical Specications