4 PELLUX 200 TOUCH
EN
Thank you for your condence in us and our product,
we also congratulate you on your choice of the PEL-
LUX boiler. In order to achieve the highest efciency
and safe working conditions, please read this Installa-
tion & Operating Manual carefully and comply with the
recommendations and observations contained in it.
The PELLUX 200 boiler is designed to operate in
open or closed systems. Please note that the system
has to be protected in accordance with the applicable
regulations. For the boilers operating in an open and
closed systems, protection of the system must be in
accordance with local regulations. PELLUX 200 boil-
er’s can be used in residential single and multi-family
buildings, guest houses, department stores, etc.
The basic boiler fuel is a modern, eco-friendly fuel in
the form of wood pellets. A burner used in the unit en-
sures minimum pellet consumption in relation to the
thermal power received, resulting in fuel-efcient and
comfort operation of the boiler.
The PELLUX boiler has a compact design and oper-
ational solutions adapted to streamline its operation.
With the enhanced electronic control, you can control
many parameters of the unit, adjusting it to different
installation conditions and individual needs.
This Manual applies to the PELLUX 200 boiler with
the PBMAX 20.1 burner.
The Pellux 200 boiler has been equipped with the fol-
lowing components of the set:
• Exhaust fan (1 pce)
• Round brush Ø 68 (1 pce)
• Temperature sensor CT2a L=0,6m (1 pce)
• Outdoor Temperature sensor CTZ-01 (1 pce)
• Ramrod handle (1 pce)
• PBMAX burner (1 pce)
• User manual (1 pce)
The Pellux 200 boiler can be equipped with additional
accessories that are not part of the Pellux 200 boiler
set. Below list of available accessories:
• Pellet bunker + feeder
ZP 350 + PP12 (300l - about 200kg)
ZP 600 + PP15 (500l - about 330kg)
• Internet module
• Wireless room temperature controller
• CAN communications cable 5,0 m
• CAN communications cable 1,5 m
• CAN communications cable 0,45 m
• CTP-02 room temperature sensor
• CAN 1/0 MC-1 expansion module
• ML-2 CAN Lambda probe module assembly
• CTP02R room temperature sensor
• VIDE ROOM Wireless room temperature controller
Equipment
Optional Accessories
1 Introduction
Section 1 | ntroduction
To Next Page
Loading...
