Nibe SMO S40 - Page 62

Menu 8.3 - Manage settings
Here you can manage (save as or retrieve from) all the
menu settings (user and service menus) in SMO S40
with a USB memory.
The menu settings can be saved to the USB memory
using "Save settings", in order to restore them later or
to copy the settings to another SMO S40.
Caution
When you save the menu settings to the USB
memory you replace any previously saved
settings on the USB memory.
Via "recover settings" you reset all menu settings from
the USB memory.
Caution
Reset of the menu settings from the USB
memory cannot be undone.
Manual restoring of software
If you want to restore the software to the previous ver-
sion:
1.
Switch off SMO S40 via the shutdown menu. The
status lamp goes out, off/on button light up blue.
2.
Press the on/off button once.
3.
When the on/off button changes colour from blue
to white, press and hold the on/off button.
4.
When the status lamp changes to green, release
the on/off button.
Caution
If the status lamp should turn yellow at any
time, SMO S40 has ended up in emergency
mode and the software has not been restored.
TIP
If you have a previous version of the software
on your USB memory, you can install that in-
stead of manually restoring the version.
NIBE SMO S40Chapter 10 | Service62