Nibe SMO S40 - Menu 4 - My System

Menu 4 - My system
OVERVIEW
4.1 - Operating mode
4.2.2 - Solar electricity
1
4.2 - Plus functions
4.2.3 - SG Ready
4.2.5 - Smart Price Adaption™
4.4 - Weather control
4.5 - Away mode
4.6 - Smart Energy Source
4.7.1 - Electricity price4.7 - Energy price
4.7.2 - Fixed electricity price
4.7.3 - Shunt valve-controlled addition-
al heat
4.7.4 - Step-controlled additional heat
4.7.6 - External additional heat
4.8 - Time and date
4.9 - Language
4.10 - Country
4.11.1 - Installer details4.11 - Tools
4.11.2 - Audio
4.11.3 - Fan de-icing
4.11.4 - Home screen
4.30.4 - Factory setting, user4.30 - Advanced
1
Consult the accessory’s Installer Manual.
MENU 4.1 - OPERATING MODE
Operating status
Alternative: auto, manual, add. heat only
Manual
Alternative: Additional heat, heating, Cooling
Add. heat only
Alternative: Heating
The operating mode for SMO S40 is normally set to
"Auto". It is also possible to use operating mode "Addi-
tional heat only". Select "Manual" to choose which
functions are to be activated.
If "Manual" or "Additional heat only" is selected, select-
able options are shown further down. Tick the functions
you want to activate.
Operating mode auto
In this operating mode, SMO S40 automatically selects
which functions are permitted.
Operating mode manual
In this operating mode, you can select the functions that
are permitted. You cannot deselect "Compressor" in
manual mode.
Operating mode add. heat only
In this operating mode the compressor is not active,
only additional heat is used.
Caution
If you choose mode "add. heat only" the com-
pressor is deselected and there is a higher op-
erating cost.
Caution
You should not change from additional heat
only if you do not have a heat pump connected
(see menu 7.3.1 "Configure").
Manual
"Compressor" is the unit that produces heating and hot
water for the home. You cannot deselect "compressor"
in manual mode.
"Additional heat" is the unit that helps the compressor
to heat the home and/or the hot water when it cannot
manage the entire requirement alone.
"Heating" means you obtain heating in the home. You
can deselect the function when you do not wish to have
the heating on.
45Chapter 9 | Control – MenusNIBE SMO S40