NIBE VVM 500 13
START GUIDE 5.7
START GUIDE 5.7
START GUIDE 5.7
START GUIDE 5.71/21
THE DISPLAy
Menu system
When the door to the heat pump is opened, the menu system’s
four main menus are shown in the display as well as certain ba-
sic information.
Menu 1 – Indoor climate
Setting and scheduling the indoor climate.
Menu 2 – Hot water
Setting and scheduling hot water production.
This menu only appears if a water heater is docked to the heat
pump.
Menu 3 - Info
Display of temperature and other operating information and ac-
cess to the alarm log.
Menu 4 – Heat pump
Setting time, date, language, display, operating mode etc.
Menu 5 - Service
Advanced settings. These settings are not available to the user.
The menu is visible by pressing the Back button for 7 seconds.
Start guide
The first time the heat pump is started a start guide is started.
The start guide instructions state what needs to carried out at the
first start together with a run through of the heat pump’s basic
settings.
The start guide ensures that the start-up is carried out correctly
and cannot be bypassed. The start guide can be started later in
menu 5.7.
Indoor temperature -
(if a room sensor is
connected)
Outdoor temp.
Hot water temp.
Extra hot water
(if activated)
Estimated amount of
hot water
If the start guide is left on this page it closes automati-
cally in 60 min
To Next Page
Loading...
