Nice RMF3004 - General Features of the Rmf3004 Receiver; Introduction; Technical Specification

01 - INTRODUCTION
03 - TECHNICAL SPECIFICATION
02 - GENERAL FEATURES OF THE RMF3004 RECEIVER
The “RMF3004 Multifunction Receiver” was developed to manage access con-
trol in residential or commercial condominiums operating in the following modes:
TX (remote controls), CTWB (RFID scanners/biometrics), PASSIVE TAG, AC-
TIVE TAG or IO Module (dependent on third party software). It can also work
in joint modes, such as TX+CTWB mode or TX+TP mode, all described in this
manual.
- Operation in conjunction with MG 3000 Module (2010, IP Module or MG 3000
Module);
- 4 independent channels with Wiegand communication (34 and 66 bits);
- 4 independent channels with RS-485 communication;
- 2 RS-232 communication ports;
- 8 independent relay outputs (dry contact) (NO and NC) with adjustable reten-
tion time;
- 16 predened digital inputs for use with pass-through sensors, open door sen-
sors, external buttons and bypass;
- Compatible with Linear-HCS/Nice products (RFID scanners, biometric scan-
ners and UHF antennas);
- Connects with other receivers to expand the CAN network;
- Sends hitchhike alert and open/breached door via aggregate sensors;
- Uses 12VDC @ 2A power supply (not included).
- CHANNELS
2 CAN ports
1 USB Host port
4 digital inputs for pass-through sensors (vehicles)
4 digital inputs for open door sensors
4 digital inputs for external button (exit clearance)
4 digital inputs for bypass
4 Wiegand channels
2 RS-232 channels
4 RS-485 channels
- COMMUNICATION
RS-232: message display and QR Code scanners
RS-485: biometric scanners and UHF antennas “Linear-HCS/Nice”
- ENGLISH -
57