ENGLISH – 67
&
&
Unlocking and manual movement
a
The gate can only be unlocked once the leaf has come to
a standstill.
The gearmotor is equipped with a mechanical unlocking device that can
be used to open and close the door manually.
These manual operations should only be performed in case of a power
outage, malfunctions or during the installation phases.
To unlock the device:
1. pull the releasing cord (A) (“Figure 25")
A
64
2. the door can now be moved manually to the desired position.
To lock the device:
1. pull the releasing cord (A) (“Figure 26")
A
65
2. manually move the door to align the lower part of the motor car-
riage with the upper part so that it slots into place.
To Next Page
Loading...
Need help?
General
