Nice TTD0110 - Programming the Brightness Levels; Using the Memorised Transmitter

EN
10 – English
Delete only the transmitters
x 1
Delete only the parameters
x 2
Delete only the transmitters and param-
eters
x 3
05.
5 seconds
green LED
no. of ... flashes according to
the chosen function
06.
green LED
3 sec. =
07.
2
green LED: memorising OK
4.5 - Programming the brightness levels
4.5.1 - Using “Memorised Transmitter”:
This procedure can only be done using a transmitter already memo-
rised in “Mode 1”.
The memorised brightness level can only be recalled after being as-
sociated with a transmitter button programmed in Mode 2.
01.
3 sec.
1
green
LED
02.
3 sec.
2
green
LED
03.
Use the
keys
p - q
to
adjust
brightness
desired light
intensity value
10
seconds
2
green
LED
04.
select the desired function
Level 1
=
2
green
LED
Level 2
=
2
green
LED
Level 3
=
2
green
LED
Level 4
=
2
green
LED