EN
English – 13
5 - Replacing a fuse
1
6 - TECHNICAL SPECIFICATIONS
Input
Voltage 230 Vac ± 10%
Frequency 50 Hz
Power consumption (standby) 550 mW
Output
Voltage 230 Vac ± 10%
Frequency 50 Hz
Maximum start-up current 80 A
Environment
Operating temperature -40 + 55° C
Storage temperature -40 + 70° C
IP 54
Dimensions 43 x 25 x 150 mm
Weight 100 g
7 - SCRAPPING THE PRODUCT
As in installation, also at the end of product lifetime, the disassembly and scrap-
ping operations must be performed by qualified personnel. This product is made
up of different types of material, some of which can be recycled while others
must be disposed of. Seek information on the recycling and disposal systems
envisaged by the local regulations in your area for this product category.
Caution! – some parts of the product may contain pollutant or hazardous sub-
stances which, if disposed of into the environment, may cause serious damage
to the environment or physical health.
As indicated by the symbol on the left, disposal of this product in
domestic waste is strictly prohibited. Separate the waste into cate-
gories for disposal, according to the methods envisaged by current
legislation in your area, or return the product to the retailer when
purchasing a new version.
Caution! – Local legislation may envisage serious fines in the event of abusive
disposal of this product. The packing materials of the product must be dis-
posed of in compliance with local regulations.
To Next Page
Loading...
