Nice TTD0110 - Using Further Transmitters Mode

EN
English – 7
4.3.2 - Using “Further Transmitters”: Mode 1
This procedure allows you to associate a transmitter to the dimmer in
“Mode 1”.
01.
NEW
transmitter
for 8
seconds
1
red LED
02.
OLD transmitter
already memorised
x 3
03.
NEW
transmitter
for 5 seconds
04.
2
green LED: memorising OK
2 red LED: memorising NOT CONCLUDED
in this case, repeat the procedure from the beginning
4.3.3 - Using “Further Transmitters”: Mode 2
This procedure allows you to associate a transmitter to the dimmer in
“Mode 2”.
01.
OLD
transmitter
already
memorised
for 8
seconds
1
green LED
02.
OLD
transmitter
already
memorised
for 8
seconds
2
green LED
03.
OLD
transmitter
already memorised
select the desired function:
Dimmer Up > Toggle > Dimmer Down
x 1
Dimmer Up
x 2
Dimmer Down
x 3
Toggle
x 4
Level 1
x 5
Level 2
x 6
Level 3
x 7
Level 4
x 8
OFF
x 9