DIGITAL AIR MICROMETER USERS MANUAL (Second Edition)
18
6.4 Settings
(1) How to switch to settings mode
(2) Structure of settings mode
① At settings mode (mode lamp [MEAS] is lit), please press
/
SET
continuously for 2 seconds.
② Switches to settings mode (mode lamp [SET] lights up in
orange color).
Point
At measurement mode, if /
SET
is pressed fo
2 seconds, mode will switch to settings mode
(mode lamp [SET] will light up in orange color)
Measurement mode
Standard settings
(Normal)
Detailed settings
(Detail)
System settings
(System)
End of settings mode
(END)
Measurement mode
• Cancel settings values (CANCEL)
• Refresh settings values (WRITE)
Settings mode
To Next Page
Loading...
Need help?
General