Battery Installation
1. Open battery cover in the direction in the figure.
2. Install batteries in battery case by the figure.
3. Close battery cover to the original position.
Caution
•
Incorrect battery type in battery replacement indicates explosion hazard.
•
Dispose waste battery by relevant guidance and instructions.
•
Ensure correct direction of positive and negative electrodes in battery installation.
Note
•
Put the battery out of reach by children.
•
Take out the batteries in remote controller in case remote controller is not in use for a long term.
•
Please do not charge the battery or put the battery in fire or water.
•
Please do not discard and dispose waste battery together with household garbage.
Dispose waste battery by
local regulations.
•
Improper battery replacement indicates explosion hazard. Do only use the battery of the same type
recommended by the manufacturer in battery replacement.
• Store the battery in cool and dry place away from light, and keep the battery away from fire and water.
• In case of battery leakage, wipe off leakage liquid, and then replace with new battery. In case leakage
liquid is attached to the body or clothes, wash with water promptly.
To Next Page