Nierbo UT300 - Menu Operation; Navigating the On-Screen Display (OSD) Menu

20
Menu Operation
The projector is provided with multi-language on-screen display menu for image adjustment and
setting change.
Operation method
1. Press Menu to open OSD menu.
2. In case OSD is displayed, use / to select any function in main menu.
3. Press to enter function setting sub-menu after selecting required main menu item.
4. Use / to select required item, and then use / to adjust setting.
5. Press Menu to return to main menu.
6. To exit from OSD, please press Menu again. OSD menu will be closed, and the projector will
save new settings automatically.
OSD menu
Main menu
Sub-menu
Options
1. Picture
Image Mode
PC / Movie / Viewmatch
/ User1/ User2 / Bright
User Mode Management
Bright
/ PC
/ Movie / Viewmatch
Luminance
0 - 100
Contrast
0 - 100
Definition
0 - 15
Color Temperature
Normal / Cool color /Bulb (Natural) Color
Bulb Power
Normal /Eco/Smart + Eco
Advanced
Noise Reduction
0 - 31
Grey Coefficient
Selection
1.6/1.8/2.0/2.1/2.2/2.3/2.4/ 2.6/2.8
Brilliant Color
Enable/Disable
Fine Adjustment
of Color
Temperature
R Gain/G Gain/B Gain /R Offset/G Offset /B Offset
Color
Management
Primary Color
Yellow/Red/Green/Blue/Cyan/Purple
Red
Chromaticity
0 - 100
Gain
0 - 100
Saturation
0 - 100
Reset the Current Image
Mode
Reset/Cancel