15
o The battery must have a cap, or “button top”;
o The battery must be between 67-69mm long, and 18-
19mm wide.
• If and when the battery is removed, always keep the battery
stored in a box and adhere to the following safety notices:
o DO NOT IMMERSE THE BATTERY IN ANY LIQUID.
o DO NOT USE UNAUTHORIZED CHARGERS.
o DO NOT FORCE A REVERSE CHARGE OR A REVERSE
CONNECTION.
o DO NOT ADAPT THE BATTERY TO UNSPECIFIED
APPLICATIONS.
o KEEP THE BATTERY AWAY FROM HEAT AND FIRE.
o DO NOT MAKE A SHORT-CIRCUIT.
o AVOID UNNECESSARY IMPACT TO THE BATTERY.
o DO NOT PENETRATE WITH A NAIL OR STRIKE WITH A
HAMMER.
o DO NOT USE OR PLACE THE BATTERY NEAR FIRE, A
HEATER OR A HIGH TEMPERATURE.
o DO NOT DIRECTLY SOLDER THE BATTERY.
o DO NOT DISASSEMBLE THE BATTERY.
To Next Page
Loading...
