USING THE REMOTE CONTROL
E-5
Inserting the batteries in the remote control
1 Open the battery compartment cover.
2 Insert 2 AAAbatteries into the battery compartment withthe polarity the same as marked inside
the batterycompartmentin the remote control.
3 Replace the batterycover.
Step 1 Step 2
Step 3
Battery precautions- to prevent battery leakage that may result in damage to the unit, please
follow these instructions:
1. Install batteries correctly, with the polarity the same as marked inside the battery
compartment in the remote control.
2. Only batteri
es of the same or equiva
lent type are to be us ed.
3. Use only the size and type of battery specified by the manufacturer.
4. If the unit is not used for a long period of time, remove the battery to prevent damage or
injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged, they can overheat and
rupture (follow battery manufacturer instructions).
6. Dispose of batteries safely in accordance with your local authorities.
Warning: when you are not using the unit, always unplug from the mains supply. Do
not leave
the unit in Standby, or operating when
you leave the house.
45° 45°
Point the remote control directly at the remote sensor at no more than a 45° angle and a
maximum distance of 6 metres.
To Next Page
Loading...
