Nikon 1 J2 User Manual

53
t
3
Select the desired option.
4
Frame the photograph and shoot.
Self-timer mode: Press the shutter-
release button halfway to focus, and
then press the button the rest of the
way down. The self-timer lamp will
start to flash and a beep will begin to
sound. Two seconds before the photo
is taken, the lamp will stop flashing
and the beeping will become more
rapid.
Remote control mode: Aim the ML-L3 at
the infrared receiver on the camera
(0 13) and press the ML-L3 shutter-
release button (stand at a distance of
5 m/16 ft or less). In delayed remote
mode, the self-timer lamp will light for
about two seconds before the shutter is released. In quick-
response remote mode, the self-timer lamp will flash after the
shutter has been released.
Use the multi selector to highlight the
desired option and press J.

Nikon 1 J2 Specifications

General

Sensor Type	CMOS
Effective Pixels	10.1 million
Screen Size	3.0 inches
Lens Mount	Nikon 1 mount
Effective Angle of View	Approx. 2.7x lens focal length (35mm format equivalent)
Movie File Format	MOV
Movie Video Compression	H.264/MPEG-4 AVC
Movie Audio Recording Format	AAC
Metering Method	Matrix, Center-weighted, Spot
Shutter Type	Electronic shutter
Dimensions	106 x 61 x 29.8 mm
Sensor Size	13.2 mm x 8.8 mm
Screen Resolution	921k-dot
Video Resolution	1920 x 1080 (60i/30p), 1280 x 720 (60p)
Battery Type	EN-EL20 Rechargeable Li-ion Battery
Image Size	3872 x 2592
File Format	JPEG, NEF (RAW)
Monitor Type	TFT LCD
Exposure Modes	Program, Shutter-priority, Aperture-priority, Manual
Shutter Speed	1/16000 to 30 s
Flash Sync Speed	1/60 sec
Shooting Mode	Continuous, Self-timer
Interface	USB 2.0
HDMI Output	HDMI mini-connector (Type C)
Storage Media	SD, SDHC, SDXC