Turning the Camera On
Press
the power switch
to
turn the cam-
era
on. The power lamp will briefly light
green and the monitor will turn on.
II
Turning
the
Camera
Off
To
turn the camera off, press the power switch
again.
The
monitor will turn off.
• Check the battery level and number
of
exposures remaining in the monitor.
,~
25
F5.6
~
Battery
level
Exposures
remaining
II
Battery
Level
Display
NO
ICON
jBattery fully charged or partially discharged; level
I
9escriptiGI
Cannot
take
pictures.
Insert
fully-charged
battery.
I shown by
fii)
or~.~·'
icon in detailed
!:!is~I~~.
(CD
6)."
!Low battery.
Ready
fully-charged battery
or
prepare
to
charge battery.
Battery exhausted; shutter-release disabled. Insert
charged battery.
II
Number
of
Exposures
Remaining
The monitor shows the number
of
pictures
that
can
be stored
on
the memory card at current settings.
II
Formatting
Memory
Cards
If
this
is
the first
time
the
memory
card will be used in the camera or
if
the card
has
been formatted in another device, select Format
memory
card in the setup menu and follow the on-screen instructions
to
format
the card
(CD
42).
Note
that this permanently deletes any data the
card
may
contain.
Be
sure
to
copy any photographs and
other
data you wish
to
keep
to
a
computer
before proceeding.
5
To Next Page
Loading...
